How much does a golf simulator cost in 2026?
Golf simulator cost in 2026 by tier, from a $5,000 DIY setup to a $50,000+ custom room, with line items and the costs people forget, like subscriptions and power.
- Topic
- How To
- Published
- Read
- 8 min
- Carry
- 1,840 words

In this guide 11 sections
- What does each budget tier get you?
- Golf simulator cost by tier: the line items
- Is a $5,000 golf simulator worth building?
- What changes between $10,000 and $15,000?
- Why most dedicated rooms cost $20,000 to $35,000
- What does a $50,000+ custom simulator room include?
- Which golf simulator costs do people forget?
- What does a golf simulator cost over five years?
- Is it cheaper to build it yourself or have it installed?
- Where should you spend, and where can you save?
- Questions people ask
A golf simulator costs about $5,000 for a basic do-it-yourself setup, $10,000 to $15,000 for a solid build around a floor camera launch monitor, $20,000 to $35,000 for an overhead launch monitor in a padded, finished room, and $50,000 or more for a custom room with a Trackman or Foresight overhead unit. The launch monitor is the biggest single line item. The numbers that catch people off guard are the ones outside the box: subscriptions, electrical work, heating and cooling, and labor.
Prices checked November 2026.
What does each budget tier get you?
| Tier | Rough total | Launch monitor type | Room it fits | Main trade-off |
|---|---|---|---|---|
| Starter | About $5,000 | Radar behind the ball | Deep garage or basement, about 16 ft or more | Indoor spin and club data are estimates; no PC |
| Mid-range | About $10,000-15,000 | Floor camera beside the ball | Short or shared rooms | Unit sits on the floor; lefties move it |
| Dedicated room | About $20,000-35,000 | Overhead camera | Permanent room, ceiling about 9 ft or more | Needs ceiling power, padding and a fixed layout |
| Custom room | $50,000 and up | Premium overhead (Trackman, Foresight) | Purpose-built or remodeled room | Subscriptions, Intel-only PCs for some brands, contractor scheduling |
Before any of these numbers mean much, check the space. A simulator needs about a 9 ft ceiling, 12 ft of width and 17 ft of depth to work well. The room dimensions guide shows what changes at each threshold.
Golf simulator cost by tier: the line items
These are example builds at current street prices. The brands are placeholders for a category. Swap any part for an equivalent and the total moves by a few hundred dollars, not thousands.
| Line item | About $5,000 | About $10,000-15,000 | About $20,000-35,000 | $50,000+ |
|---|---|---|---|---|
| Launch monitor | Garmin R10, about $500 | Square Golf Omni $1,599, Bushnell Launch Pro $2,999.99, or Foresight GC3 (often about $4,000) | ProTee VX, about $6,500 | Trackman iO from $13,995, or Foresight GCHawk about $19,500-20,000 |
| Software, first year | Garmin Home Tee Hero, $99.99/yr | GSPro, $250/yr | ProTee Labs (no subscription) plus GSPro, $250/yr | Trackman software included the first year |
| Computer | A tablet you already own | RTX 5070 gaming PC, about $1,400-2,000 | RTX 5070 Ti class PC, about $2,200-3,000 | Intel PC with an RTX 5080 for Trackman at 4K, about $3,500 or more |
| Projector | Optoma GT2000HDR, about $1,200 | BenQ TK710STi about $2,000-2,200, or AH700ST $2,299 | BenQ AK700ST 4K laser, $2,899 | BenQ LK936ST about $4,899, or AK900ST $5,999 |
| Enclosure and screen | Carl's Place DIY kit with standard screen, about $1,000-1,200, plus about $200 of EMT | DIY kit with a premium screen, about $1,600-2,000 | Carl's Place Pro kit, about $3,000-4,600 before pipe | Built-in screen wall and custom framing, quoted by the job |
| Mat and turf | Carl's Place HotShot, from about $535 | Fiberbuilt studio mat, about $1,150 | Fiberbuilt hitting and putting system, about $3,000-4,500 | Wall-to-wall turf and a putting green, quoted by the job |
| Padding outside the enclosure | DIY foam and carpet, a few hundred dollars | About $300-800 | About $1,000-2,500 | Upholstered wall and ceiling panels, part of the room build |
| Electrical | Existing outlets | One dedicated circuit, about $450-900 | Two or three circuits plus ceiling outlets, about $1,500-2,500 | Panel work, ceiling power and network drops |
| Lighting and climate | None | Basic LED fixtures | Dimmable LEDs, about $500-1,500 | Lighting design plus a mini split, about $2,500-5,000 installed |
| Install labor | DIY | DIY, or about $1,000-4,000 hired | About $1,000-4,000 if hired | Installer or general contractor |
| Rough total | About $4,500-5,000 | About $9,000-15,000 | About $20,000-35,000 | $50,000 to well past $100,000 |
The first three columns line up with the parts lists in my DIY build walkthrough. The ranges here run higher because they include the padding, power and labor that a parts list leaves out.
Is a $5,000 golf simulator worth building?
Yes, if the room is deep and your expectations are set. A Garmin R10 on the floor 6 to 8 ft behind the ball, a kit enclosure, a 0.5:1 laser projector and a tablet running Home Tee Hero will play real courses. What you give up is accuracy on short shots and spin indoors, and the option to run GSPro well without a PC.
The biggest risk at this budget is cutting padding to hit the number. A hard mat, bare drywall beside the screen and an unprotected garage door are the three things I'd fix before upgrading anything else.
What changes between $10,000 and $15,000?
This is where the launch monitor moves from radar to cameras, and the computer becomes a real gaming PC. A floor camera like the Square Golf Omni reads spin off the ball and doesn't need the extra depth radar does, so it suits shorter rooms. The low end of the range is a self-built Omni setup near $9,000 to $10,000. The high end is a Launch Pro or GC3, a laser projector with zoom, better padding and someone hired to mount the projector and run power.
Price the subscriptions before you choose between these units. Bushnell's Launch Pro needs a yearly plan after the first year, while the Omni runs third-party software without one. My launch monitor guide lists what each one requires.
Why most dedicated rooms cost $20,000 to $35,000
An overhead launch monitor changes the build more than its price suggests. The ProTee VX mounts in the ceiling, so it needs an outlet and a network run up there, and it handles left- and right-handed players without moving anything. Once the floor is clear, people want the rest of the room to match: a 4K laser projector, a bigger enclosure, wall-to-wall turf and padding beyond the enclosure.
The spread inside this tier is mostly labor and finish. A careful DIY build with a ProTee VX lands near $20,000 to $23,000. Add an installer, an electrician for two or three circuits and better padding and it's closer to $30,000. My ProTee VX review covers the mounting and software details.
What does a $50,000+ custom simulator room include?
At this level the room is the project. The launch monitor is typically a Trackman iO or a Foresight GCHawk, and the rest of the money goes into the space: framed walls with a built-in screen surround, upholstered padding, a putting green, a mini split for heat and cooling, lighting on dimmers and scenes, and furniture behind the hitting area.
Two costs are specific to this tier. Trackman's software runs about $700 to $1,100 a year after the included first year, and Trackman and Foresight software need an Intel processor, which rules out some prebuilt PCs. The Trackman iO review goes through who actually uses the extra data.
Which golf simulator costs do people forget?
Software and yearly plans
| Software or plan | Cost | Notes |
|---|---|---|
| GSPro | $250/yr | Some launch monitors also need a paid tier from their maker to connect |
| E6 Connect Basic / Expanded | $300 / $600 per year | Some launch monitors include a starter bundle of courses |
| Garmin Home Tee Hero | $99.99/yr | Runs on a phone or tablet |
| Trackman plans | About $700-1,100/yr after year one | Full club data needs Home Complete, about $10,500 more up front |
| Bushnell, Uneekor, Rapsodo memberships | Varies by plan | Some lock GSPro access or data behind a paid tier |
Electrical
A gaming PC can draw 8 to 12 amps under load and a bright laser projector 3 to 5. Two or three dedicated circuits keep a breaker from tripping mid-round. National averages put a dedicated 20-amp circuit at about $450 to $900, and closer to $700 is common. A full panel or long runs through finished walls push that up, and electrical work often needs a permit.
Heating and cooling
Garages are the usual problem. A projector and a gaming PC add heat in summer, and a cold garage in winter is uncomfortable and hard on electronics. A single-zone mini split for a two-car garage is commonly quoted at about $2,500 to $5,000 installed. Insulating first lets you buy a smaller unit.
Lighting and flooring
Light on the screen washes out the picture, so you may need to move or replace fixtures in front of the golfer and add dimmable lights over the hitting area. On the floor, an uneven garage slab shows through turf, and a bare concrete edge where balls roll back is worth covering.
Install labor
For a standard residential install, labor quotes commonly run about $1,000 to $4,000. Framing, drywall and finish carpentry are extra and priced like any remodel.
Permits for commercial builds
A business bay is a different budget. Expect building and electrical permits, inspections, fire and accessibility requirements and business software on top of the hardware.
Wear parts
Hitting strips wear out every few years, and impact screens eventually need replacing. Carl's Place screens alone run from about $216 for a small standard screen to about $1,120 for a large premium one.
What does a golf simulator cost over five years?
Day-one price is only part of it. Here's a simple five-year comparison of two common overhead setups, counting only the launch monitor and its software.
| Cost | ProTee VX with GSPro | Trackman iO Home | Trackman iO Home Complete |
|---|---|---|---|
| Hardware | About $6,500 | $13,995 (includes year one) | About $24,500 (includes year one) |
| Software, years 1-5 | GSPro $250 x 5 = $1,250 | About $700 x 4 = $2,800 | About $1,100 x 4 = $4,400 |
| Five-year total | About $7,750 | About $16,800 | About $28,900 |
That gap isn't a reason to skip Trackman if you'll use its data with a coach. It is a reason to pick on what you'll actually use, not on the sticker price alone.
Is it cheaper to build it yourself or have it installed?
| DIY | Installed | |
|---|---|---|
| Labor cost | $0, plus tools and return trips | About $1,000-4,000 for a standard room |
| Time | About 5-7 full days for a first build | Often about 2 days on site for an experienced crew |
| Biggest risk | Projector or enclosure that doesn't fit the room | Paying for design choices you could have made yourself |
| Best for | Handy owners with a simple, rectangular room | Overhead launch monitors, finished rooms, tight schedules |
A middle path works well: do the enclosure, turf and software yourself, and hire an electrician for the circuits and ceiling power. Whichever way you go, plan the room in order before buying anything. The five-step planning checklist covers that sequence, and the enclosure types comparison covers whether a kit, retractable or foldable system fits your space.
Where should you spend, and where can you save?
- Spend on the mat. A hard mat is the most common reason a simulator stops getting used.
- Spend on padding and the screen. They're cheap next to a launch monitor and they decide whether a mishit is a laugh or a repair.
- Save on resolution if the room is golf-only. A 1080p laser on a textured impact screen looks close to 4K from the tee. See the projector guide for throw ratios.
- Save on data you won't use. Ball data plus club path and face is plenty for rounds with friends.
- Never save on mounting. Projectors and overhead units go into joists or solid blocking, not drywall.
Launch House has a separate breakdown of installed price ranges for residential and commercial builds if you're comparing quotes.


